PCoIP Zero Client and Host Administrator Guide (Issue 5)

Note: To enable a property in the MC, click the Set in Profile checkbox and configure the
fields as indicated. After you update the properties on this page, click Save to save your
changes.
Figure 4-94: MC Display Topology Configuration
Table 4-90: MC Display Topology Configuration Parameters
Parameter Description
Dual-Display Zero Client
Enable Configuration Enable to configure a device that supports two displays per PCoIP
chipset.
Display Layout Select the layout for the displays (A and B). This setting should reflect
the physical layout of the displays on the desk.
l Horizontal: Select to arrange displays horizontally, as indicated
in the diagram.
l Vertical: Select to arrange displays vertically, as indicated in the
diagram.
TER1206003 Issue 5 295
PCoIP® Zero Client and Host Administrator Guide