PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 4-95: OSD Tera1 Display Topology Page
Table 4-91: OSD Tera1 Display Topology Page Parameters
Parameter Description
Enable Configuration Enable to configure a device that supports two displays per PCoIP
chipset.
Display Layout Select the layout for the displays (A and B). This setting should reflect
the physical layout of the displays on the desk.
l Horizontal: Select to arrange displays horizontally, as indicated
in the diagram.
l Vertical: Select to arrange displays vertically, as indicated in the
diagram.
TER1206003 Issue 5 299
PCoIP® Zero Client and Host Administrator Guide