PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameter Description
Resolution The display resolution can be configured for a PCoIP session
between a virtual machine or host and a zero client. The zero client
detects the supported display resolutions of the monitor and
populates them to the drop-down menu. By default, the display’s
native resolution is used.
7.23.3 OSD Quad-display: Display Topology Settings
The Display Topology page lets users change the display topology for a PCoIP session. You
can access this page from the Options > User Settings > Display Topology menu on your
client OSD.
To apply the display topology feature to a PCoIP session between a client and a VMware
View virtual desktop, you must have VMware View 4.5 or later. To apply the display
topology feature to a PCoIP session between a client and a PCoIP host, you must have the
PCoIP host software installed on the host.
Note: Always change the display topology settings using this OSD Display Topology page.
Do not try to change these settings using the Windows Display Settings in a virtual machine
when using VMware View.
Figure 4-96: OSD Tera2 Display Topology Page
TER1206003 Issue 5 301
PCoIP® Zero Client and Host Administrator Guide