PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 4-102: MC Link to Imported Firmware – Configured
Table 4-95: MC Link to Imported Firmware Parameters
Parameter Description
Firmware
Version
Select the firmware file that you want to assign to the profile.
Note: The firmware file must first be imported into the MC from the Update >
Import Firmware menu. For more information, see the "PCoIP® Management
Console User Manual" (TER0812002).
Apply when
existing
firmware is
Configure one of the following options from the drop-down menu:
l different: Select this option if you want to overwrite the firmware on the
device only if its version is different from the firmware version you selected.
l less than: Select this option if you want to overwrite the firmware on the
device only if its version is less than the firmware version in the x.y.z field,
and then enter the version in this field (e.g., 4.1.0).
7.25.2 AWI: Firmware Upload Settings
The Firmware page lets you upload a new firmware build to the host or client. You can
access this page from the Upload > Firmware menu.
Note: The host and client must have the same firmware release version installed.
Figure 4-103: AWI Firmware Upload Page
TER1206003 Issue 5 306
PCoIP® Zero Client and Host Administrator Guide