PCoIP Zero Client and Host Administrator Guide (Issue 5)
l If the host has permissions programmed (authorized and/or unauthorized), the
permissions are sent to the client. If the client has any unauthorized devices, they are
added to the host's unauthorized devices and the consolidated list is used.
l If the host does not have permissions programmed, the client's permissions are used.
The factory defaults have no USB permissions configured on the host. The factory defaults
for the client USB permissions are "any, any, any" (that is, authorized USB devices).
Depending on the host implementation (for example, hardware PCoIP host or software
PCoIP host), you can configure the USB permissions as required on the client and/or host.
The host USB permissions are only updated at the start of a PCoIP session. They are
authorized in the following order of priority (from highest to lowest):
l Unauthorized Vendor ID/Product ID
l Authorized Vendor ID/Product ID
l Unauthorized Device Class/Sub Class/Protocol
l Authorized Device Class/Sub Class/Protocol
Figure 4-108: AWI Host USBPage
TER1206003 Issue 5 311
PCoIP® Zero Client and Host Administrator Guide