PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 4-112: Device Class Parameters
Figure 4-113: Device ID Parameters
Table 4-102: USB Authorized/Unauthorized Devices Parameters
Parameter Description
Add new When adding a new USB authorization or unauthorization entry, select one of
the following:
l Class: The USB device is authorized by its device class, sub-class, and
protocol information.
l ID:The USB device is authorized by its vendor ID and product ID
information.
Device Class This field is enabled when Class is selected.
Select a supported device class from the drop-down menu, or select Any to
authorize or unauthorize (disable) any device class.
Sub Class This field is enabled when Class is selected.
Select a supported device sub class from the drop-down menu, or select Any to
authorize or unauthorize (disable) any sub-class.
Note: If Any is selected as the device class, this will be the only selection
available.
Protocol This field is enabled when Class is selected.
Select a supported protocol from the drop-down menu, or select Any.
Note: If Any is selected as the device class or sub-class, this will be the only
selection available.
TER1206003 Issue 5 316
PCoIP® Zero Client and Host Administrator Guide