PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameter Description
Vendor ID This field is enabled when ID is selected.
Enter the vendor ID of the authorized (or unauthorized) device. The valid range
is hexadecimal 0-FFFF.
Protocol ID This field is enabled when ID is selected.
Enter the product ID of the (authorized or unauthorized) device. The valid range
is hexadecimal 0-FFFF.
When you add a new USB bridged entry, the following parameters display.
Figure 4-114: USB Bridged Parameters
Table 4-103: USB Bridged Devices Parameters
Parameter Description
Vendor ID Enter the vendor ID of the bridged device. The valid range is hexadecimal 0-
FFFF.
Protocol ID Enter the product ID of the bridged device. The valid range is hexadecimal 0-
FFFF.
7.27 Configuring the Certificate Store
7.27.1 MC: Certificate Store Management
The Certificate Store section is located at the bottom of the Manage Profiles page on the
Management Console. This section lets you configure a profile to retain the certificate
settings that are configured on a device, to disable the settings, or to upload a new
certificate file to the profile.
The maximum size for a certificate that you can upload to a profile from the MC is 8,176
bytes. You can upload up to 16 certificates to a profile providing you do not exceed the
maximum storage size of 98,112 bytes. The available storage field indicates the remaining
number of certificates and how much space is left in the certificate store.
Note: If SCEP is enabled, you can only upload a maximum of 14 additional certificates
since two slots are reserved for SCEP server certificates.
TER1206003 Issue 5 317
PCoIP® Zero Client and Host Administrator Guide