PCoIP Zero Client and Host Administrator Guide (Issue 5)

Table 4-108: OSD Tera2 Display Page Parameters
Parameter Description
Enable Attached
Display Override
This option is intended for legacy systems. It configures the client to
send default EDID information to the host when a monitor cannot be
detected or is not attached to the client. In versions of Windows prior
to Windows 7, once the host had no EDID information, it would
assume no monitors were attached and would never recheck. This
option ensures that the host always has EDID information when the
client is in session.
The following default resolutions are advertised when this option is
enabled:
l 2560x1600 @60 Hz
l 2048x1152 @60 Hz
l 1920x1440 @60 Hz
l 1920x1200 @60 Hz
l 1920x1080 @60 Hz
l 1856x1392 @60 Hz
l 1792x1344 @60 Hz
l 1680x1050 @60 Hz
l 1600x1200 @60 Hz
l 1600x900 @60 Hz
l 1440x900 @60 Hz
l 1400x1050 @60 Hz
l 1366x768 @60 Hz
l 1360x768 @60 Hz
l 1280x1024 @60 Hz
l 1280x960 @60 Hz
l 1280x800 @60 Hz
l 1280x768 @60 Hz
l 1280x720 @60 Hz
l 1024x768 @60 Hz
l 848x480 @60 Hz
l 800x600 @60 Hz
l 640x480 @60 Hz
Any displays attached to the client will be set to the native resolution
of 1024x768 when this option is enabled.
TER1206003 Issue 5 326
PCoIP® Zero Client and Host Administrator Guide