PCoIP Zero Client and Host Administrator Guide (Issue 5)

Table 4-111: AWI Client Reset Parameters
Parameter Description
Reset Parameters When you click this button, a prompt appears for confirmation. This is
to prevent accidental resets.
Enable Keyboard
Shortcut
When enabled, the user can press the specified combination of keys
to automatically reset the parameters and permissions for the device.
Hide keyboard shortcut
sequence in OSD
When Enable Keyboard Shortcut is enabled and this field is
disabled, the keyboard sequence appears on the Reset Parameters
page for the client.
When both Enable Keyboard Shortcut and this field are enabled,
the keyboard sequence does not appear on the Reset Parameters
page for the client; however, the user can still use the keyboard
sequence to reset the parameter.
7.30.2 AWI Host: Parameter Reset Settings
The Reset Parameters page lets you reset configuration and permissions to factory default
values stored in flash memory. You can access this page from the Configuration > Reset
Parameters menu.
Note: Resetting parameters to factory default values does not revert the firmware or clear
the custom OSD logo.
Figure 4-124: AWI Host Reset Page
Table 4-112: AWI Host Reset Parameters
Parameter Description
Reset Parameters When you click this button, a prompt appears for confirmation. This is
to prevent accidental resets.
TER1206003 Issue 5 332
PCoIP® Zero Client and Host Administrator Guide