PCoIP Zero Client and Host Administrator Guide (Issue 5)

7.30.3 OSD: Parameter Reset Settings
The Reset page lets you reset configuration and permissions to factory default values stored
in flash memory. You can access this page from the Options > Configuration > Reset
menu.
Note: Resetting parameters to factory default values does not revert the firmware or clear
the custom OSD logo.
Figure 4-125: OSD Reset Page
Table 4-113: OSD Reset Parameters
Parameter Description
Reset Parameters When you click this button, a prompt appears for confirmation. This is
to prevent accidental resets.
7.31 Viewing Diagnostics (AWI/OSD)
7.31.1 AWI: Help for Event Log Settings
For information about the AWI's Event Log page, see AWI:Event Log Settings.
TER1206003 Issue 5 333
PCoIP® Zero Client and Host Administrator Guide