PCoIP Zero Client and Host Administrator Guide (Issue 5)

7.31.2 OSD: Help for Event Log Settings
For information about the OSD's Event Log page, see OSD:Event Log Settings.
7.31.3 AWI Host: Session Control Settings
The Session Control page lets you view information about a device and also allows you to
manually disconnect or connect a session. You can access this page from the Diagnostics >
Session Control menu.
Figure 4-126: AWI Host Session Control Page
Table 4-114: AWI Host Session Control Page Parameters
Parameter Description
Connection State This field displays the current state for the session. Options include
the following:
l Disconnected
l Connection Pending
l Connected
Two buttons appear below the Connection State field:
l Connect:This button is disabled for the host.
l Disconnect: If the connection state is Connected or Connection
Pending, click this button to end the PCoIP session for the device.
If the connection state is Disconnected, this button is disabled.
Peer IP Peer IP Address: Displays the IP address for the peer device. When
not in session, this field is blank.
Peer MAC Address Peer MAC Address: Displays the MAC address of the peer device.
When not in session, this field is blank.
7.31.4 AWI Client: Session Control Settings
The Session Control page lets you view information about a device and also allows you to
manually disconnect or connect a session. You can access this page from the Diagnostics >
TER1206003 Issue 5 334
PCoIP® Zero Client and Host Administrator Guide