PCoIP Zero Client and Host Administrator Guide (Issue 5)

Session Control menu.
Figure 4-127: AWI Client Session Control Page
Table 4-115: AWI Client Session Control Page Parameters
Parameter Description
Connection State This field displays the current state for the session. Options include
the following:
l Disconnected
l Connection Pending
l Connected
Two buttons appear below the Connection State field:
l Connect: If the connection state is Disconnected, click this
button to initiate a PCoIP session between the client and its peer
device. If the connection state is Connection Pending or
Connected, this button is disabled.
l Disconnect: If the connection state is Connected or Connection
Pending, click this button to end the PCoIP session for the device.
If the connection state is Disconnected, this button is disabled.
Peer IP Peer IP Address: Displays the IP address for the peer device. When
not in session, this field is blank.
Peer MAC Address Peer MAC Address: Displays the MAC address of the peer device.
When not in session, this field is blank.
7.31.5 AWI Host: Session Statistics Settings
The Session Statistics page lets you view current statistics when a session is active. If a
session is not active, the statistics from the last session will display. You can view this page
from the Diagnostics > Session Statistics menu.
TER1206003 Issue 5 335
PCoIP® Zero Client and Host Administrator Guide