PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameters Description
802.1X Authentication
Status
Indicates whether 802.1x authentication is enabled or disabled on
the device.
PCoIP Packets Statistics PCoIP Packets Sent: The total number of PCoIP packets sent in the
current/last session.
PCoIP Packets Received: The total number of PCoIP packets
received in the current/last session.
PCoIP Packets Lost: The total number of PCoIP packets lost in the
current/last session.
Bytes Bytes Sent: The total number of bytes sent in the current/last
session.
Bytes Received: The total number of bytes received in the
current/last session.
Round Trip Latency The minimum, average, and maximum round-trip PCoIP system and
network latency in milliseconds (+/- 1 ms).
Bandwidth Statistics Transmit Bandwidth: The minimum, average, and maximum traffic
transmitted by the Tera processor. The active bandwidth limit is the
maximum amount of network traffic the Tera processor may currently
generate. The value is derived from the configured bandwidth
parameters and the current (or last) network congestion levels.
Receive Bandwidth: The minimum, average, and maximum traffic
received by the Tera processor.
Pipeline Processing
Rate
How much image data is currently being processed by the image
engine (in megapixels per second).
Endpoint Image Settings
In Use
Displays if the image settings being used are configured within the
client or within the host. This is based on how the Use Client Image
Settings field is configured on the Image page for the host device.
Initial Image Quality The minimum and maximum quality setting is taken from the Image
page for the device.
The active setting is what’s currently being used in the session and
only appears on the host.
Image Quality
Preference
This setting is taken from the Image Quality Preference field on the
Image page. The value determines if the image is set to a smoother
versus a sharper image.
Build to Lossless Options that may appear in this field include the following:
Enabled: The Disable Build to Lossless field on the Image page is
unchecked.
Disabled: The Disable Build to Lossless field is checked.
Reset Statistics Click this button to reset the statistic information on this page.
Note: The Reset Statistics button also resets the statistics reported
in the Home page.
TER1206003 Issue 5 337
PCoIP® Zero Client and Host Administrator Guide