PCoIP Zero Client and Host Administrator Guide (Issue 5)

Table 4-117: AWI Client Session Statistics Page Parameters
Parameters Description
Connection State The current (or last) state of the PCoIP session. Values include the
following:
l Asleep
l Canceling
l Connected
l Connection Pending
l Disconnected
l Waking
802.1X Authentication
Status
Indicates whether 802.1x authentication is enabled or disabled on
the device.
PCoIP Packets Statistics PCoIP Packets Sent: The total number of PCoIP packets sent in the
current/last session.
PCoIP Packets Received: The total number of PCoIP packets
received in the current/last session.
PCoIP Packets Lost: The total number of PCoIP packets lost in the
current/last session.
Bytes Bytes Sent: The total number of bytes sent in the current/last
session.
Bytes Received: The total number of bytes received in the
current/last session.
Round Trip Latency The minimum, average, and maximum round-trip PCoIP system and
network latency in milliseconds (+/- 1 ms).
Bandwidth Statistics Transmit Bandwidth: The minimum, average, and maximum traffic
transmitted by the Tera processor. The active bandwidth limit is the
maximum amount of network traffic the Tera processor may currently
generate. The value is derived from the configured bandwidth
parameters and the current (or last) network congestion levels.
Receive Bandwidth: The minimum, average, and maximum traffic
received by the Tera processor.
Pipeline Processing
Rate
How much image data is currently being processed by the image
engine (in megapixels per second).
Endpoint Image Settings
In Use
Displays if the image settings being used are configured within the
client or within the host. This is based on how the Use Client Image
Settings field is configured on the Image page for the host device.
Initial Image Quality The minimum and maximum quality setting is taken from the Image
page for the device.
TER1206003 Issue 5 340
PCoIP® Zero Client and Host Administrator Guide