PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameters Description
Image Quality
Preference
This setting is taken from the Image Quality Preference field on the
Image page. The value determines if the image is set to a smoother
versus a sharper image.
Build to Lossless Options that may appear in this field include the following:
Enabled: The Disable Build to Lossless field on the Image page is
unchecked.
Disabled: The Disable Build to Lossless field is checked.
Reset Statistics Click this button to reset the statistic information on this page.
Note: The Reset Statistics button also resets the statistics reported
in the Home page.
Display The port number for the display.
Maximum Rate This column shows the refresh rate of the attached display.
If the Maximum Rate field on the Image page is set to 0 (i.e., there is
no limit), the maximum rate is taken from the monitor's refresh rate.
If the Maximum Rate field on the Image page is set to a value
greater than 0, the refresh rate shows as "User Defined."
Output Process Rate The frame rate currently being sent from the image engine on the
host to the client.
Image Quality Shows the current lossless state of the attached display:
l Lossy
l Perceptually lossless
l Lossless
7.31.7 OSD:Session Statistics Settings
The Session Statistics page lets you view from the last session. You can view this page
from the Options > Diagnostics > Session Statistics menu.
TER1206003 Issue 5 341
PCoIP® Zero Client and Host Administrator Guide