PCoIP Zero Client and Host Administrator Guide (Issue 5)
Figure 4-131: AWI Host CPU Page
Table 4-119: AWI Host CPUPage Parameters
Parameters Description
Host Identity The identity string of the host computer (if data is available).
Current Power State The current power state that is configured for the host.
Change Power State Select one of the following options:
l S5 (Soft Off): Configures the client's remote PC button to perform
a soft power off of the host (i.e., to put the host in sleep mode)
when the button is pressed for less than four seconds.
l S5 (Hard Off): Configures the client' remote PC button to perform
a hard power off of the host (i.e., a device shutdown) when the
button is pressed for more than four seconds.
Note: To use this feature, the host must have compatible hardware
architecture.
7.31.9 AWI Client: Audio Settings
The Audio page lets you generate an audio test tone from the client. You can access this
page from the Diagnostics > Audio menu.
To generate an audio test tone, click Start to start the test tone. Click Stop to stop the test.
Note: The Audio page functionality is only available on a client when the client is not in a
PCoIP session.
TER1206003 Issue 5 343
PCoIP® Zero Client and Host Administrator Guide