PCoIP Zero Client and Host Administrator Guide (Issue 5)

required to support this resolution for DVI interfaces.
The following figure illustrates how to connect video cables to each type of zero client to
achieve 2560x1600 resolution on a connected display.
Figure 5-1: DVI and DisplayPort Connectors for 2560x1600 Resolution
l TERA2321 DVI-I dual-display PCoIP zero client: This zero client supports one
2560x1600 monitor. Connect the two DVI-I cable connectors on a custom dual-link DVI-
I cable adapter to the two DVI-I ports on the zero client, as shown in the above
illustration (upper left).
l TERA2321 DP+DVI-I dual-display PCoIP zero client: This zero client supports one
2560x1600 monitor on the DisplayPort interface only. Connect the connector on a
DisplayPort cable to the DisplayPort port on the zero client, as shown in the above
illustration (upper right).
l TERA2140 DVI-D quad-display PCoIP zero client: This client supports up to two
2560x1600 resolution monitors. For each monitor, connect the two DVI-D cable
connectors on a custom dual-link DVI-D cable adapter to the two DVI-D ports that are
shown in the above illustration (lower left). These connectors must be connected to ports
on the client exactly as shown.
l TERA2140 DP quad-display PCoIP zero client: This zero client supports up to two
2560x1600 monitors. For each one, connect the connector on a DisplayPort cable to a
DisplayPort port on the zero client, as shown in the above illustration (lower right).
TER1206003 Issue 5 376
PCoIP® Zero Client and Host Administrator Guide