PCoIP Zero Client and Host Administrator Guide (Issue 5)

Once the connection is established, the OSD local GUI disappears, and the session image
appears.
Direct to Host
The following figure shows the Connect window for a Direct to Host session type—i.e.,
when the client is connecting to a host card in a remote workstation.
While the network connection is initializing, various status messages are displayed above
the button to indicate the progress, such as the message shown below.
Figure 2-15: OSD Connection Status
If problems are experienced during startup—e.g., if the connection cannot be made or a
DHCP lease fails—other messages display in this area to indicate the nature of the problem.
View Connection Server
The following figure shows the Connect window for a View Connection Server
connection—i.e., when the client is using a VMware View Connection Server to connect to
a virtual desktop.
Figure 2-16: OSD View Connection Server Connect Window
TER1206003 Issue 5 49
PCoIP® Zero Client and Host Administrator Guide