PCoIP Zero Client and Host Administrator Guide (Issue 5)

l When no video source is connected to the host, the following overlay appears with the
message "No source signal." This helps you debug a situation where the host does not
have the video source connected or the host PC has stopped driving a video signal. To
correct this, connect the host PC video to the host. (This message can also be triggered
by the host going into display power save mode.)
Figure 2-34: No Source Signal Overlay
l When a video source to the host does not correspond to the video port used on the client,
the following overlay appears with the message "Source signal on other port." This helps
you debug a situation where the video source is connected to the wrong port. To correct
this, swap the video ports at the host or the client.
Figure 2-35: Source Signal on Other Port Overlay
5.3.5 OSD Menus
The Options menu in the upper left corner has five sub-menus that link to OSD
configuration, information, and status pages.
l Configuration: This menu contains links to pages that let you define how the device
operates and interacts with its environment. Each tab has an OK, Cancel, and Apply
button that lets you accept or cancel the settings changes made.
l Diagnostics: This menu contains links to pages that help diagnose issues concerning the
client.
l Information: The page under this menu displays hardware and firmware version
information about the device.
l User Settings: This menu contains links to pages that let users define mouse, keyboard,
image, display, and touch screen settings, and also the VMware View certificate
checking mode.
l Password: The page under this menu lets you update the administrative password for the
device.
TER1206003 Issue 5 58
PCoIP® Zero Client and Host Administrator Guide