PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 3-2: PCoIP Software Endpoints
6.2 Connection Prerequisites
6.2.1 PCoIP Client–Host Card Connections
Before connecting a host card and zero client, please ensure that the following prerequisites
are in place:
l The host card and zero client have the same firmware versions. For information how to
upload firmware using the MC, see the "PCoIP® Management Console User Manual"
(TER0812002). For information on how to assign a firmware file to a profile using the
MC, see Uploading Firmware. For information on how to upload firmware to a single
host or client using the AWI, see AWI: Firmware Upload Settings.
l The PCoIP host software is installed on the host PC or workstation. For details, please
see "PCoIP® Host Software for Windows User Guide" (TER1008001). If you are using
VMware View as a broker, View Agent must also be installed on the host PC or
workstation.
l The Host Driver Function is enabled on the host card.
TER1206003 Issue 5 62
PCoIP® Zero Client and Host Administrator Guide