PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameter Description
Gateway Device’s gateway IP address
Primary DNS Server Device’s primary DNS IP address
Secondary DNS Server Device’s secondary DNS IP address
Table 4-6: Session Parameters
Parameter Description
Identify Host By Specifies the host identify method
Host IP Address Specifies the host IP address
Host MAC Address Specifies the host MAC address.
You can set the host MAC address to 00-00-00-00-00-00 to
ignore this field when a session starts.
Note: When host discovery or connection management is configured on the client, you
cannot modify the client session parameters. A message appears on the Initial Setup Client
page instead of the session parameters.
7.2 Configuring the Network
7.2.1 MC: Network Settings
The settings on this page let you configure a profile with the Dynamic Host Configuration
Protocol (DHCP), Maximum Transmission Unit (MTU), and Simple Network Managment
Protocol parameters.
Note: To enable a property in the MC, click the Set in Profile checkbox and configure the
fields as indicated. After you update the properties on this page, click Save to save your
changes.
TER1206003 Issue 5 88
PCoIP® Zero Client and Host Administrator Guide