PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 4-5: OSD Network Page
Table 4-9: OSD Network Page Parameters
Parameter Description
Enable DHCP When enabled, the device contacts a DHCP server to be assigned
an IP address, subnet mask, gateway IP address, and DNS servers,
and also requests a domain name (option 15), host name (option
12), and client fully qualified domain name (FQDN).
When disabled, you must set these parameters manually.
IP Address The device's IP address. If DHCP is disabled, you must set this field
to a valid IP address. If DHCP is enabled, you cannot edit this field.
Subnet Mask The device's subnet mask. If DHCP is disabled, you must set this field
to a valid subnet mask. If DHCP is enabled, you cannot edit this field.
Warning: It is possible to configure an illegal IP address/subnet mask
combination (e.g., invalid mask) that leaves the device unreachable.
Take care when setting the subnet mask.
Gateway The device's gateway IP address. If DHCP is disabled, this field is
required. If DHCP is enabled, you cannot edit this field.
TER1206003 Issue 5 94
PCoIP® Zero Client and Host Administrator Guide