PCoIP Zero Client and Host Administrator Guide (Issue 5)
Parameter Description
Client Certificate Click Choose to select the client certificate you want to use for your
802.1x devices. The list of certificates that appears includes the
certificates uploaded from the Certificate Upload page that contain a
private key. The certificate you choose from the Network page is
linked to the read-only Client Certificate field on the Certificate
Upload page.
Note: PCoIPonly supports one 802.1x client certificate. Ensure your
security details are all contained within the one file. The 802.1x
certificate must contain a private key.
7.3 Label Settings
7.3.1 AWI: Label Settings
The Label page lets you assign a device name to the device. You can display this page for
the host or client from the Configuration > Label menu.
Figure 4-6: AWI Label Page
Table 4-10: AWI Label Page Parameters
Parameter Description
PCoIP Device Name Lets you give the host or client a logical name. The default is pcoip-
host-<MAC> or pcoip-portal-<MAC>, where <MAC> is the device's
MAC address.
This field is the name the host or client registers with the DNS server
if DHCP is enabled and the system is configured to support
registering the hostname with the DNS server.
It's important to ensure that the PCoIP Device Name is unique for
each endpoint in the network and follows these naming conventions:
l The first and last character must be a letter (A-Z or a-z) or a digit
(0-9).
l The remaining characters must be letters, digits, or hyphens.
l The length must be 63 characters or fewer.
TER1206003 Issue 5 96
PCoIP® Zero Client and Host Administrator Guide