Using PCoIP Host Cards with VMware View (Issue 3)

Using PCoIP Host Cards with VMware View
TER0911004 Issue 3 35
Parameter
Description
available on the network.
Note: For more information about connecting to VMware View virtual desktops, see
"Using PCoIP Zero Clients with VMware View User Guide" (TER0904005).
Note: The enabled encryption mode must match between the host and client for a
session to be established. If more than one mode is enabled, the firmware selects the
following:
 Host to Tera1 or Tera2 clients: AES-128-GCM or AES-256-GCM for the
PCoIP session.
 VMware View 4.5 and later to Tera1 client: SALSA20-256-Round12 for the
PCoIP session.
 VMware View 4.5 and later to Tera2 client: AES-128-GCM for the PCoIP
session.
Disconnect
Message Filter
This field lets you control what type of messages appear when a session is
disconnected. There are three categories:
 Information: User- or administrator-initiated actions affecting the session:
 Warning: System-initiated, but expected actions affecting the session:
 Error: Unexpected system-initiated actions causing session to fail:
You can choose to display:
 Show All messages – This option shows all disconnect messages including
Info, Warning, and Error messages.
 Show Error and Warnings Only – This option hides info messages and
displays only error and warning messages.
 Show Error Only – This option hides Info and Warning messages and displays
only Error messages.
 Show None – Don’t show any disconnect messages.