HP ThinPro, version 4.1 Administrator's Guide

4. Click the arrow on the right side of the Desktop pool. Select Protocols > PCoIP.

5. Click Connect.

NOTE: To set PCoIP as the default protocol or to disable user protocol selection, edit the

desktop/pool settings in the VMware View Manager window (http://<Server>/admin).

NOTE: To set PCoIP as the default protocol or to disable user protocol selection, edit the desktop/

pool settings in the VMware View Manager window (http://<server>/admin).

NOTE: To enable VMware View USB Redirection, use the USB Manager utility. See USB Manager

on page 34 for instructions.

XDMCP

XDMCP is a way to connect directly to remote X servers. X servers are used to display graphics on most

UNIX-like operating systems, such as Linux, Berkeley Software Distribution (BSD), and Hewlett Packard

UniX (HP-UX).

1. To add an XDMCP connection, click Connections > Add.

2. Select Xdmcp and set the appropriate configuration options:

Table 3-31 New XDMCP connection configuration settings

Option Description

Name The connection name.

Type

The XDMCP connection type. Valid options are: chooser, query, and

broadcast.

Address This value is required if the Type value is set to query.

Font Server

Use font server Use a remote X font server instead of locally installed fonts.

Font server Font server is not enabled unless the Use font server option is checked.

Configure display

Click to set the display configuration for the XDM connection. If you do not set

this configuration, the default configuration will be used. For information on this

screen, see

Display preferences on page 31.

Click Next to continue.

3. Set the appropriate advanced options (refer to

Table 3-9 New connection advanced settings

on page 10).

4. Click Finish to save your settings and close the dialog box.

Connections