HP ThinPro, version 4.1 Administrator's Guide

NOTE: Because the Synergy and stunnel software is also installed on the HP dc72 Blade Workstation
Client and the HP dc73 Blade Workstation Client (running Embedded OS versions 9.xx and 10.xx),
these client computers can be interconnected to the HP gt7725 Thin Client in client aggregation
configurations.
Configuring client aggregation
NOTE: Client aggregation must be configured individually on each thin client—on the aggregation
server and on each aggregation client.
Client aggregation configuration is a two-step process:
1.
Configuring the aggregation clients on page 28—From one to three aggregation clients can be
configured.
2.
Configuring the aggregation server on page 28
Configuring the aggregation clients
Perform this procedure on each aggregation client:
1. Double-click Client Aggregation.
2. Click Client.
3. Type the server hostname or IP address of the aggregation server in the field.
4. Click Apply to apply the changes.
Configuring the aggregation server
To configure the aggregation server:
1. Double-click Client Aggregation.
2. Click Server.
28 Chapter 3 Reference