HP ThinPro, version 4.1 Administrator's Guide

Disabling client aggregation
To disable client aggregation:
1. Double-click Client Aggregation.
2. Select Disabled.
3. Click Apply and Closed.
Display preferences
This utility allows you to add, edit, and delete profiles. A profile is a display specification, which
includes resolution, refresh rate, bit depth, and whether or not the display should be rotated.
Most administrators use the default profile, which:
●
Uses Display Data Channel (DDC) to query the resolution and refresh rate from the monitor
●
Uses 24- or 32-bit color depth
●
Does not rotate the display
The administrator may set up different profiles when:
●
Using a 16-bit color depth should improve RDP or ICA performance because less data has to be
transmitted over the network or sent to the graphics chip
●
Some users have to run an application that requires a specific resolution or bit depth in order to
function properly
●
The administrator wants to standardize on one display profile, even though there are many
different monitors across the organization
●
One or more users run applications that require their monitor to be rotated (portrait versus
landscape mode)
NOTE: The Display Preferences window contents are different based on the actual hardware
model. Some models allow configuration of up to four monitors, some two, and some only one.
Adding a profile
To add a profile:
1. Double-click Display Preferences.
2. Click New.
3. Under Profile Settings, type a name in the Profile Name field.
4. Select the appropriate Resolution for your monitor.
5. Select the Depth.
6. Select the appropriate Orientation for your monitor.
7. Click Save to keep your changes or Revert to discard them.
Control Panel
31