HP ThinPro, version 4.1 Administrator's Guide

●
HTTP Proxy—Proxy to be used for HTTP communications
●
FTP Proxy—Proxy to be used for FTP communications
4. Configure the IPSec tab:
●
Add—Add new rule
Can expand on this, if needed
●
Edit—Edit highlighted rule
●
Delete—Delete highlighted rule
5. Configure the VPN tab:
Connection Type
●
Cisco
◦
Gateway—Server gateway address
◦
Group Name—Group's groupname
◦
Group Password—Group password
◦
Domain—Domain name
◦
User Name—User's username
◦
User Password—User's password
●
PTTP
◦
Gateway—Server gateway address
◦
NT Domain—NT Domain name
◦
User Name—User's username
◦
User Password—User's password
6. Configure the HP Velocity tab:
Enable packet loss prevention—When possible prevents the loss of data over the internet
Screensaver
To configure the screensaver:
1. Double-click Screensaver.
2. Select the Screensaver settings:
a. Select Enable screensaver, or clear the selection if you do not want a screensaver.
b. Select the number of minutes of inactivity after which to activate the screensaver. Type the
number in the field or use the up or down arrow keys to select a number.
Control Panel
37