HP ThinPro, version 4.1 Administrator's Guide

Factory reset
In Factory Reset, you can
●
Save the current configuration
●
Restore the factory settings
●
Restore the factory image
To access these functions:
1. Double-click Factory Reset.
2. Click the button that will accomplish the task you desire.
HP Automatic Update
To configure HP Automatic Update:
1. Double-click HP Automatic Update.
2. Click Enable HP Automatic Update on system startup if you wish to have this system
updated on restarts.
3. If the previous option is enabled, you can click Enable manual configuration if you wish to
supply the server address via ftp, http, or https. If you wish to supply the Server, Path, User
name, and Password, you may do this in the supplied fields.
HPDM Agent
Configure the HP Device Management Agent using this feature.
1. Double-click HPDM Agent to access this screen.
2. Use the General tab to set the following:
●
Backup Gateway
●
Pull Interval
●
Log Level
●
Delay Scope
3. Set the groups using the Groups tab. You can select preassigned groups from the DHCP tab or
you can use static custom groups.
4. Click OK to save your changes.
NOTE: Changes will take effect after the HP Device Management Agent is restarted.
42 Chapter 3 Reference