HP TeemTalk Terminal Emulator, version 7.3, User Manual

●
Inverse
Factory default: Unchecked
This option is enabled only when the Graphics print option is selected. Selecting this option will
cause the bitmap printed to be a negative image of the display.
●
Swap Black White
Factory default: Checked
This option is enabled only when the Graphics option is not selected. Selecting this option will
cause white to be printed as black and black to be printed as white. Other colors are unaffected
by this option.
●
Monochrome
Factory default: Unchecked
Printing will be in black and white only.
●
Horizontal position
Factory default: Left
Causes the print output to be positioned on the left or right side of the page or to be centered on
the page.
●
Vertical position
Factory default: Top
Causes the print output to be positioned on the top or bottom of the page or to be centered on the
page.
Clicking OK causes the screen printing to occur without using the emulation printer functionality.
Clicking Emulation Printer will cause the print output to be processed through the Emulation Printer.
Print Buffer
Selecting Print Buffer in the File menu will send a copy of all the data contained in the window
buffer to the currently selected printer.
Auto Print
Selecting Auto Print in the File menu will toggle auto print mode on and off, as indicated in the File
menu when auto print mode is on. Auto print mode causes each line of data to be transmitted to the
printer when the cursor moves to a new line as a result of a carriage return, line feed, vertical tab, or
form feed.
Eject Page
Selecting Eject Page in the File menu will enable data that has been spooled to the printer to be
printed.
File Menu Printing Options
59