Getting Started (For 3D Models Only)

3 Setting up your computer
❑
Follow the steps in the setup documentation included with your computer.
❑ Place the computer so that all ventilation openings are unobstructed and cabling is not in a walkway or
where it can be stepped on or damaged by placing furniture on it.
❑ Connect all power cords from the computer and accessories to a power surge protection device that is
specifically labeled as having surge protection, an uninterruptible power supply (UPS), or a similar device. If
the computer has a television tuner or telephone connection, protect the computer by using surge
protection with these signal inputs as well. Connect the television cable or the telephone line cord to the
surge protection device, and then connect the device to the computer.
❑
Download and install operating system updates.
❑ Look in the computer box for additional printed details or updates.
❑ Read the
Safety and Regulatory Information document. Tap the Start button, tap All Programs, and then
tap User Guides.
❑ Read the
Safety & Comfort Guide for proper workstation setup, posture, health and work habits, and
electrical and mechanical safety information. Tap the Start button, tap All Programs, and then tap User
Guides or visit
www.hp.com/ergo.
Connecting your computer
1. Squeeze the two tabs on the rear door at the back of the computer and pull
the door open.
Getting Started
Connecting your computer
5