HP LTO Ultrium 5 tape drives UNIX, Linux and OpenVMS configuration guide (March 2010)

7. Reboot the system.

For HP-UX 11iv3 (11.31)

1. Start up the SMH web-based interface.

% smh –w

This will attempt to launch a web browser. Mozilla browser

is the default when HP-UX 11i v3

is installed.

2. From the SMH Tools page, select Modules from the Kernel Configuration section:

Figure 3 SMH web-based interface (HP-UX11i v3)

3. In the Search box on the Kernel Configuration page, type stape and execute the search. The

search results list will include both estape and stape modules. If either of these modules is not

installed both Current State and Next Boot State will be shown as “unused”. A state of “static”

indicates that the module is installed.

Select the estape module

radio button. Its details will appear in a panel below the modules

list. From the right hand panel on the web page, click the Modify Module link.

If Mozilla is being invoked for the first time you may be asked to agree to license terms for the software.

The estape and stape modules are linked, so it is sufficient to select the estape module alone for installation.

UNIX, Linux and OpenVMS configuration guide 11