HP R3000v ERM User Manual

INSTALLATION

HP R3000v ERM User Guide S 164201732 Rev 1

Rackmount Setup

CAUTION

S The cabinet is heavy (see page 17). A minimum of two people are required to remove the

cabinet from its carton.

S Install the ERM(s) directly below the UPS so that all wiring between the cabinets is installed

behind the front bezels and is inaccessible to users.

NOTE: Mounting rails are required for each individual c abinet.

To install the rail kit:

1. Attach the left and right rails to the rear rails as shown in Figure 1. Do not tighten the

screws.

Adjusteachrailsizeforthedepthofyourrack.

Right Rail

Left Rail

×8Pan-Head

Screws (6 places)

Rear Rails

Figure 1 Attaching the Rails