HP R3000v ERM User Manual
INSTALLATION
HP R3000v ERM User Guide S 164201732 Rev 1
9
3. Remove the front bezel of each ERM. See Figure 8.
To remove the bezel, loosen the two captive screws on the right side of the bezel.
Grasp the sides of the bezel and slide the bezel to the left and then away from the
cabinet.
Bottom ERM Cable Knockout
(underneath bezel)
Top ERM Cable Knockout
ERM Bezel Hook
Figure 8 Removing the ERM Front Bezel
4. For the bottom (or only) ERM, remove the ERM cable knockout on the top of the ERM
front bezel. See Figure 8 for the location of the top ERM cable knockout.
5. If you are installing more than one ERM, for each additional ERM remove the ERM
cable knockout on the top and bottom of the ERM front bezel. See Figure 8 for the
location of the ERM cable knockouts.