HP R3000v ERM User Manual

MAINTENANCE
HP R3000v ERM User Guide S 164201732 Rev 1
12
CAUTION
The ERM is heavy (see page 17). A minimum of two people are required to lift the cabinet into
the rack.
To replace the ERMs:
1. RemovetheUPSrightfrontbezel(seeFigure10).
To remove the bezel, loosen the two captive screws on the right side of the bezel.
Grasp the top and bottom of the bezel and slide the bezel to the right.
NOTE: A ribbon cable connects the control panel to the UPS. Do not pull on the cable or
disconnect it.
NOTE: Leave
ribbon cable
connected.
Figure 10 Removing the UPS Right Front Bezel