HP R3000v UPS User Manual

INSTALLATION

HP R3000v UPS User Guide S 164201731 Rev 1

Checking the Accessory Kit

Verify that the following additional items are included with the UPS:

S UPS user guide

S CD with HP Value UPS Manager

S USB cable

S Serial cable

S Two power cords (one for India and one for China)

If you ordered an optional Extended Runtime Module, verify that an ERM user guide is

included with the ERM.

NOTE: Discard the ERM user guide if you are installing the ERM with a new UPS at the same

time. Use the UPS user guide to install both the UPS and the ERM.

Rackmount Installation

The HP R3000v UPS rackmount cabinet comes with all of the hardware required for

installation in a standard EIA or JIS seismic rackmount configuration with square and round

mounting holes. The rail assemblies adjust to mount in 48-cm (19-inch) racks with front to

rear rail distances from 61 to 76 cm (24 to 30 inches) deep.

Checking the Rail Kit Accessories

Verify that the following rail kit items are included for each cabinet:

S Left rail assembly:

-Leftrail

-Rearrail

-(3)M4

×8 pan-head screws

S Right rail assembly:

- Right rail

-Rearrail

-(3)M4

×8 pan-head screws

S Rail hardware kit:

- (10) M6

×16 pan-head screws

- (10) M6 hex cage nuts

- (10) M6 square cage nuts

- (2) rear stop brackets

-(6)M3

×8 pan-head screws

S Mounting bracket kit:

- (2) mounting brackets

-(8)M4

×6flat-headscrews