HP R3000v UPS User Manual

INSTALLATION

HP R3000v UPS User Guide S 164201731 Rev 1

Tools Required

To assemble the components, the following tools may be needed:

S Medium flat-bladed screwdriver

S Phillips

#2 screwdriver

S 7 and 8 mm wrench or socket

Rackmount Setup

CAUTION

S The cabinet is heavy (see page 35). A minimum of two people are required to remove the

cabinet from its carton.

S If installing optional ERM(s), install the ERM(s) directly below the UPS so that all wiring

between the cabinets is installed behind the front bezels and is inaccessible to users.

NOTE: Mounting rails are required for each individual cabinet.

To install the rail kit:

1. Attach the left and right rails to the rear rails as shown in Figure 3. Do not tighten the

screws.

Adjusteachrailsizeforthedepthofyourrack.

Right Rail

Left Rail

×8Pan-Head

Screws (6 places)

Rear Rails

Figure 3 Attaching the Rails