HP R3000v UPS User Manual

HP R3000v UPS User Guide S 164201731 Rev 1
17
Chapter 4 Operation
This chapter contains information on how to use the HP R3000v UPS, including front panel
operation, operating modes, UPS startup and shutdown, and battery settings.
Control Panel Functions
The UPS has two buttons and four LEDs on the right front bezel (see Figure 14).
Power On Indicator (green)
On Battery Indicator (yellow)
Bypass Indicator (yellow)
Alarm Indicator (red)
Output On/Alarm
Silence Button
Output Off Button
Figure 14 HP R3000v UPS Control Panel
Table 1 shows the indicator status and description.
Table 1. Indicator Descriptions
Indicator Status Description
Green
On The UPS is operating normally.
Yellow
On The UPS is in Battery mode.
Flashing The battery voltage is below the warning level.
Yellow
On The UPS is in Bypass mode.
Red
On The UPS has an active alarm or fault. See “Troubleshooting” on
page 39 for additional information.