HP R3000v UPS User Manual

UPS MAINTENANCE
HP R3000v UPS User Guide S 164201731 Rev 1
30
Replacing ERMs
CAUTION
The ERM is heavy (see page 35). A minimum of two people are required to lift the cabinet into
the rack.
To replace the ERMs:
1. RemovetheUPSrightfrontbezel(seeFigure20).
To remove the bezel, loosen the two captive screws on the right side of the bezel.
Grasp the top and bottom of the bezel and slide the bezel to the right.
NOTE: A r ibbon cable connects the control panel to the UPS. Do not pull on the cable or
disconnect it.
NOTE: Leave
ribbon cable
connected.
Figure 22 Removing the UPS Right Front Bezel