HP Value UPS Manager User Manual

Diagram 3-2-10

In the “UPS Self-Test Immediately” screen, users can select the type of self-test: Self-Test for 10

seconds, Self-Test until battery low, or Self-Test for XX minutes. The time range of self-test for XX minutes

is from 1 to 99 minutes.

Note: If the “OK” button is an invalid condition, which means that your access right to the current

Agent is read only and you cannot carry out these operations, you may log in as a super user through the

“Act as Administrator” menu.

11) "UPS Test Manager" Screen

The “UPS Test Manager” screen can be opened from the “Battery Self-Test Schedule” menu item on

“Device” menu. Refer to the following diagram 3-2-11:

Diagram 3-2-11

“UPS Test Manager” can be used to display and setup a UPS self-test task. The UPS self-test task

includes “once” and “monthly”.

The UPS self-test type includes UPS self-test for 10 seconds, UPS self-test to battery low, and UPS

self-test for the appointed time. The appointed time range for a UPS self-test is 1 to 99 minutes, and the

default value is 10 minutes.

“UPS Test Manager” screen consists of two parts, task list and calendar. All of the UPS self-test and

UPS on/off tasks are shown in the calendar. The red dot denotes the Power Off action, the green dot