HP Value UPS Manager User Manual

33
The “UPS message” list box lists the messages to be sent. You can select or unselect the message by
clicking the message item.
All of the SMTP parameter default values are null, and can only be setup in the local Agent. To send
an email to the appointed user, the SMTP server name or IPv4 / IPv6 addresses must be set, or the email
will not be sent.
Note: If you want to send email via Internet, you must have an SMTP account number on the Internet.
If the “OK” button is an invalid condition, which means that your access right to the current Agent is read
only and you cannot carry out the parameter setting, you may log in as a super user through the “Act as
Administrator” menu.
16) "SMS Setting" Screen
The “SMS Setting” screen can be opened from the “SMS Setting” menu item on the “Tools” menu or
by clicking Send SMS “Setting” button in the “Event Action” screen. Refer to the following diagram 3-2-16:
Diagram 3-2-16
Below is the remark about SMS setting function:
1. Sender: SMS is sent through a GSM modem or mobile phone, which connects to your computer.
The user should select the COM port that is being used by the GSM Modem or mobile phone, and then set
the baud Rate of this COM port.