HP Value UPS Manager User Manual

44
Diagram 4-3-2
In this screen users can make a choice in setting a UPS self-test task from the options of “once” or
“monthly” in the combo box. You may set the start time of the UPS self-test in the date and time combo
box.
Note: the new self-test task cannot conflict with the UPS self-test task that has already been set and
the task of UPS Power on/off.
You can set the time span of self-test by selecting one of the buttons. It is able to be:
¾ Self-test for 10 seconds
¾ Self-test until the battery is in low capacitance
¾ Self-test for 1 to 99 minutes
Press the “Cancel” button, and the dialog will be closed and the setting above is invalid. Press the
“Ok” button, and the dialog will be closed and the task setting will present to the task list. See the following
diagram 4-3-3: