HP Value UPS Manager User Manual

Click the “OK” button to save the changes. Press the “Cancel” button to make the modification

invalid.

Note: If the “OK” buttons is an invalid condition, which means that your access rights to the

current Agent are read only and you cannot carry out the setup, you may log in as a super user via the

“Act as Administrator” menu.

8. How to use system administrator operation and modifying the password

System administrator operation

Open the “Act as Administrator” menu item from the “System” menu to popup “Administrator” screen.

See the following diagram 4-8-1:

Diagram 4-8-1

Enter the system administrator password in the screen and press the “OK” button to finish the setting.

If the password is correct, you can get the access right of the administrator to set up the Agent. If the

password is not correct, an alert box will pop up.

Modifying the system administrator password

Open the “Modify Administrator Password” menu from the “System” menu to popup the

“Administrator Password Settings” screen. This menu is valid within the local Agent. See the following

diagram 4-8-2:

Diagram 4-8-2

Enter the new password in the “New Password” edit box; reenter it in the “confirm password” edit

box. Press the “OK” button to finish the setting.

Note: If the “OK” button is an invalid condition, which indicates that the access rights to the current

Agent are “Read Only”, you cannot operate it. You may log in as a super user from the “Act as

Administrator” menu.

9. How to send an event message by email

9 Precondition

When this event occurs, the precondition for sending message by email is to connect the computer

with HP Value UPS Manager to the Internet.

9 Steps

Setup “Email Service”: Open the “Email setting” menu item from the “Tools” menu to pop up the

“Email Settings” screen. Refer to the following diagram 4-9-1: