HP Value UPS Manager User Manual
64
Diagram 4-12-4
If the Remote Control Permission switch of this Agent is not on, then you can only monitor but not
control. If the Remote Control Permission Switch is on, then you can monitor and control this device. So
after you login as a super user, you can control all of the operation. Refer to the following diagram 4-12-5.
Diagram 4-12-5
13. How to remotely control any device on the Internet
9 Precondition
¾ The computers being required to setup HP Value UPS Manager must setup the TCP/IP
protocol in the communication protocol.
The ports that the software needs open for the firewall, refer to table 4-13-1