HP Value UPS Manager User Manual

Port TCP/UDP

2198 UDP

2199 UDP

2200 UDP

2099 TCP

Table 4-13-1

¾ The computer being required to setup HP Value UPS Manager has been connected to the

Internet.

9 Steps for use

¾ Keep the communication normally: test with a network command PING

¾ Remote Control Permission Switch: This is a selectable menu item. The user can open the

submenu “Accept Remote Device” of the menu “Monitor” in the HP Value UPS Manager on

the computer whose IP address is 202.103.190.87.

¾ Startup Monitor: Refer to the following diagram 4-13-1:

Diagram 4-13-1

¾ Select the device you want to monitor

Open the “Monitor Remote device” menu item from the “Monitor” menu to pop up the “Monitor

Remote Device” screen. Refer to the following diagram 4-11-2:

Diagram 4-13-2