HP Value UPS Manager User Manual

Appendix B—HP Value UPS Manager Event Table
Serial
Number Event Description Type of Message Remarks
1 UPS Battery Low
Serious Can be set as no shutdown system
through “Shutdown parameter”
2 UPS Battery Time Exhaust
Serious Can set battery backup time through
“Shutdown parameter”
3 UPS Fail
Serious
4 UPS Output Overload
Serious
Output load is more than 110%
6 Communication Lost
Warning The connection of communication cable
is not good, or communication port
fault.
7 AC Fail
Warning
8 On Bypass
Warning UPS will be switched to bypass mode
for the reason of overload, hardware
fault and so on. Online UPS is also in
bypass mode when it is off, at this time
UPS has no protection function.
9 Bypass without output
10 Self-test Fail
Warning
11
Phase sequence incorrect
in Bypass
Warning
Three-phase UPS support
12 Battery switch not engaged
Warning
Three-phase UPS support
13 Load unbalance
Warning
Three-phase UPS support
14 Load too high
Warning
15 Internal warning
Warning
Three-phase UPS support
16 Maintain cover is open
Warning
17 AC Restore
Information
.
18 Communication Create
Information
.
19 Agent Start
Information
.
20 Agent Stop
Information
.
21 System be shutdown
Information
.
22
System be Shutdown by
Other Agent
Information
Set the Agent need to be in response to
through “Shutdown parameter”.
23 Special date Close UPS
Information
.
24 Weekly Close UPS
Information
.
25 Self-test Start
Information
Self-test begins immediately.