UPS R12000 XR Models Maintenance and Service Guide
Table Of Contents
- HP UPS R12000 XR Models Maintenance and Service Guide
- Notice
- Contents
- About This Guide
- Chapter 1: Safety and Product Information
- Chapter 2: Illustrated Spare Parts List
- Chapter 3: Identifying Components
- Front Components
- Modes of Operation
- Rear Components
- Matching the Utility Voltage
- Module Locations
- Configuring the UPS Using the LCD Menu
- Chapter 4: Removal and Replacement Procedures
- Chapter 5: Troubleshooting
- Chapter 6: Specifications
- Index
Removal and Replacement Procedures
4-2 HP UPS R12000 XR Models Maintenance and Service Guide
Replaceable Parts
The UPS contains the following replaceable parts:
• Bezels
• Battery modules
• Electronics modules
• Supervisory board
• Chassis
Tools Required
To service the UPS, you will need the following tools:
• Torque wrench
• Medium flat-bladed screwdriver
• #1 Philips screwdriver bit
• #3 Philips screwdriver bit
• Metric tools
— 7-mm
— 8-mm
— 10-mm
• Sheetmetal hole punch tools, up to 44.45 mm (1¾ inches) in diameter
The following items are supplied with the rack:
• Screws
• Cage nuts
• Cage nut-fitting tool