Installing HP-UX 11.0 and Updating HP-UX 10.x to 11.0 HP 9000 Computers Edition 1

Chapter 6 155

HP-UX System Recovery

“Expert” Recovery Using the Core Media

11.To load a ﬁle or ﬁles, enter l at the prompt; something similar to the

following will be displayed:

Filesystem kbytes used avail %cap iused ifree iused Mounted on

/ 2011 1459 552 73% 137 343 29% ?

/duped_root 2011 1418 593 71% 49 431 10% ?

Enter the filename(s) to load:

12. Enter the name(s) of the damaged/corrupted ﬁle(s) you wish to load.

For example:

sh vi date grep

The following example lists two ﬁles (ex and egrep) which must be

loaded before the ﬁles vi and grep can be loaded. It also lists a ﬁle

(date) which is not in the load list.

NOTE :

Since ./usr/bin/vi is linked to ./usr/bin/ex

'./usr/bin/ex' must precede './usr/bin/vi' in the load list.

The file 'date' is NOT in the LOADCMS archive.

NOTE :

Since ./usr/bin/grep is linked to ./usr/bin/egrep

'./usr/bin/egrep' must precede './usr/bin/grep' in the load list.

******** THE REQUESTED FILE(S): ***********

./sbin/sh ./usr/bin/vi ./usr/bin/grep

Is the above load list correct? [n]

13.This load list is incorrect, because ./usr/bin/ex does not precede

./usr/bin/vi in the list of requested ﬁles. So you would enter n.

The following is displayed:

Nothing will be loaded!