Installing HP-UX 11.0 and Updating HP-UX 10.x to 11.0 HP 9000 Computers Edition 1

Chapter 7 189
Troubleshooting
Using Config Tools
Load command
failed:
load_command
This error occurs if
the command used to
load software has
failed during the
load. Such failure can
be due to a problem
with the media or
the source
specification.
Refer to the log file for the
command used to load
software. If make_depots is
used its log file is under
/var/opt/ignite/logs.
Problem
executing
command: command
This error occurs if
the command used to
configure the
software which has
just been loaded fails.
Refer to the log file for the
command used to configure
software. If make_config is
used, its log file is under
/var/opt/ignite/logs.
Problem
executing
command to set
default:
default_cmd
This error occurs if
the command used to
set the default
release fails.
Typically this
command is
manage_index.
Refer to the log file for the
command used to configure
software. If manage_index
is used, its log file is under
/var/opt/ignite/logs.
Message(s) or
Behavior
Possible Cause Fix