Installing HP-UX 11.0 and Updating HP-UX 10.x to 11.0 HP 9000 Computers Edition 1

Chapter 7 193
Troubleshooting
During Installation and Configuration of Ignite-UX Tools and Data
Table 7-4 Booting a Client
Message(s) or
Behavior
Possible Cause Fix
Using "boot
lan.080009-xxxxxx"
s700 won't boot from
known good IUX
server.
• Not enough
temporary IP
addresses for
booting.
• rbootd is not
running on the
server.
• server lan is
something other
than ethernet, e.g.,
FDDI,X.25,token-r
ing, and s700 is
older generation
715,735,755.
Older s700's will
not be able to boot
from ROM because
rbootd doesn't
function over
non-ethernet lan.
(See rbootd(1M)).
• Allocate more
addresses in
/etc/opt/ignite/inst
l_boottab
or wait for an address
to become available.
• Start rbootd by hand:
/usr/sbin/rbootd.
• Do one of the
following:
• Start install from
bootable media
(CD-ROM,tape)
and enable
networking from
there.
• If s700 contains
9.x or 10.x
bootable disk, boot
from that disk and
run bootsys -w
s700 hostname on
the IUX server.